DeviceNet Network Scanner DVPDNET-SL

(11) Double click on RTU-DNET icon, and you will then see “RTU Setup” dialog box.

(12) Set up the parameters in RTU-DNET and confirm its I/O information.

Item	Function	Default
	The sum of the length of the status word of RTU-DNET and
Input IO	the input data of the I/O module connected to it. The status
Input IO	word of RTU-DNET occupies 2 bytes. One input channel of	N/A
Data Length	word of RTU-DNET occupies 2 bytes. One input channel of	N/A
Data Length	the special I/O module occupies 2 bytes. 8 points of the
	the special I/O module occupies 2 bytes. 8 points of the
	digital input are counted as 1 byte.

	The sum of the length of the control word of RTU-DNET and
Output IO	the output data of the I/O module connected to it. The control
Output IO	word of RTU-DNET occupies 2 bytes. One output channel of	N/A
Data Length	word of RTU-DNET occupies 2 bytes. One output channel of	N/A
Data Length	the special I/O module occupies 2 bytes. 8 points of the digital

	output are counted as 1 byte.

DIDO Input	The digital input points shall be 8’s multiple. The number will
DIDO Input	be regarded as 8 when it is less than 8 and regarded as 16	N/A
Points (X)	be regarded as 8 when it is less than 8 and regarded as 16	N/A
Points (X)	when it is bigger than 8 but less than 16.
	when it is bigger than 8 but less than 16.

14	DVP-PLC Operation Manual

2nd Ave DVP-0204520-02 operation manual DeviceNet Network Scanner DVPDNET-SL