3Com 3C882 manual Installing Analog Equipment, Analog Equipment Connection

Installing Analog Equipment 2-6

Installing Analog Equipment

You can connect an analog touch-tone telephone, answering machine, fax machine, or external analog modem to the 3C882 ISDN modem.

You will need an RJ-11 to RJ-11 cable for each analog phone port connection.

To install an analog device:

1Insert one RJ-11 connector to a phone port labeled with a telephone icon on the back of the ISDN modem as shown in Figure 2-6.

U

	-232	ISDN
RS

2 1

RESET

9VDC

.5A MAX

Figure 2-6 Analog Equipment Connection

2Insert the other RJ-11 end into the appropriate RJ-11 port on the analog device.

3If you have another analog device to install, repeat steps 1 and 2.