3Com 3C882 manual Spid Wizard Start Screen

Configuring the 3C882 ISDN Modem for a Macintosh Computer 4-5

2Select the port to which the 3C882 ISDN modem is connected and then click OK.

The SPID Wizard start screen appears, as shown in Figure 4-8.

Figure 4-8 SPID Wizard Start Screen

If you do not want to run the SPID Wizard, click Cancel. The Configuration dialog box appears (see Figure 4-13). Select your ISDN switch type, and then enter the telephone number(s) and, if required, enter the corresponding SPID(s) for your ISDN line. Refer to the section “Configuring Multilink PPP”.

3Click Next.

The SPID Wizard first checks for ISDN layer 1 status, and then configures the switch type. The status is indicated, as shown in Figure 4-9.