3Com 3CRWE920G73, 3CRWEASYG73 Software Installation, LED Indicators, 3Com Corporation, Page

Models: 3CRWEASYG73 3CRWE920G73

1 13
Download 13 pages 43.39 Kb
Page 10
Image 10
LED Indicators

LED Indicators

After the correct connection, the Power LED and the Ethernet link LED of the 3CRWE920G73 indoor bridge should light up. On the front of the Wireless Bridge you will find three LEDs

POWER

WIRELESS

ETHERNET

1 POWER LED

Off: Power supply connection not available or broken

On: Power supply connection OK

2WIRELESS activity LED Off: No activity

Blinking: Sending and receiving data

3ETHERNET LAN link LED

Off: No LAN connection available

On: LAN connection OK

4.Software Installation

Insert the installation CD-ROM delivered with the 3Com WLAN Building to Building Bridge into your CD-ROM drive

The installation wizard starts automatically and will guide you through the rest of the installation process. If the installation wizard does not start automatically, run ‘‘setup.exe’’ from the root directory of the installation CD. Then choose to install the 3Com Wireless Infrastructure Device Manager (WIDMAN) utility for helping you find the Bridge and configure its IP address.

The 3Com Installation CD contains the following tools and utilities:

3Com Wireless Infrastructure Device Manager (WIDMAN) an administration tool that helps you selects 3Com wireless LAN devices and launches their configurations in your Web browser.

3Com 3CDaemon Server Tool --a firmware upgrade tool that can act in four different capacities:

‹As a TFTP Server, necessary for firmware upgrades, and backup and restore functions. Use this option if you do not have a TFTP server set up.

‹As a SysLog Server, which is necessary to view SysLog messages.

‹As an optional TFTP Client.

‹As an optional FTP Server.

[NOTE: It is recommended that you install the 3CDaemon Server tool if you do not already have a firmware tool for upgrades on your computer.]

To install one of the tools on your computer:

1Turn on the computer;

2Insert the 3Com Installation CD in the CD-ROM drive;

The setup menu appears. If it does not appear, you can start the setup menu from the Windows Start menu. For example: Start > Run > d:setup.exe .

3In the menu, click Tools and Utilities.

4In the next screen, click the tool you want to install.

5Follow the instructions on the screens to complete the installation. Reboot the computer if prompted to do so.

6Launch the tool from the Windows Start menu.

3Com Corporation

Page 9

Page 10
Image 10
3Com 3CRWE920G73 Software Installation, LED Indicators, To install one of the tools on your computer, 3Com Corporation