4 | SETUP FOR WINDOWS NT |
|
Before You Begin Installation
Which Windows NT setup procedure you use depends on whether networking has already been installed on your computer. Verify with your MIS department which network driver installation instructions you should use.
Before setting up the card, you will need to know:
■Your network file server name, network account user name, and password.
■The Protocol used in the Microsoft Windows network (NWLink IPX/SPX compatible transport, TCP/IP protocol, NetBEUI protocol).
■The Name of the NT Server domain or workgroup to which you belong.
■Your IP address (unless you are using DHCP).
Setup Procedure
Setup With No Networking Installed
1In the Control Panel,
2When the system prompts: ”Windows NT Networking is not installed. Do you want to install it now?”, click Yes. This opens the Network Setup Wizard.
3Check Wired to the network and click Next.
4When the system prompts to have setup start searching for a network adapter, click Select from List.
5Click Have Disk. Put the Installation Disk in the floppy drive and click OK.
