3Com V7000 manual 3COM VCX IP Telephony Server

3COM VCX IP TELEPHONY

1 SERVER

	This chapter describes how to configure the features that are
	associated with the VCX IP Telephony Server.
Saving the 3Com	The 3Com VCX IP Telephony Server configuration can be saved to a CFM
VCX IP Telephony	file. After saving the configuration, the CFM file can be set as a baseline
Server	so it can be used for restoring. A backup produces a (binary) CFM file
Configuration in	containing a snapshot of the system configurables (basically, any object
EMS	that is SNMP manageable on all components). This does not include
	databases, user profiles, voice mail backup, etc. It is basically just the
	system configuration available via SNMP.
	To save the 3Com VCX IP Telephony Server configuration in EMS:
	1 From the Explorer tab, right-click3Com VCX IP Telephony Server.
	2 From the pop-up menu, select Configuration and then select Backup.
	The progress is shown in the Job Progress section of the EMS GUI.
	When the save is finished, the Working icon changes to a Finished icon.
	The default directory for .CFM files is: ...3Com\EMS\backups. The file
	name is saved as follows: <component IP
	address>_YYYYMMDDHHMMSS.cfm. For example,
	192.168.120.110_20051029185959.cfm.
Restoring the 3Com	The 3Com VCX IP Telephony Server configuration can be restored from a
VCX IP Telephony	saved CFM file. The CFM file restores any SNMP manageable system
Server	configurables. It automatically chooses the correct CFM file to restore to
Configuration in	the same server the backup was taken from. A backup cannot be applied
EMS	from one server to another.