3Com V7000 manual Configuring, Authorization, Station Agents, Adding Authorized

Configuring Authorization Station Agents 21

Configuring	In order for this feature to become available (activated), during
Authorization	installation and initial configuration of the VCX IP Telephony System, IP
Station Agents	addresses needed to be entered when prompted for the IP Address of
	the Authorized Management Stations. If at least one IP address is
	entered then this feature becomes active and only that machine can
	manage the server. If no IP addresses for authorized stations are
	configured at initial installation, then the feature is not enabled (not
	activated).
	The Authorized Stations table lists which IP addresses the common agent
	accepts SNMP request from. Requests originating from other sources are
	dropped. This is a security feature on the common agent.
Adding Authorized	Authorized station agents can only be added if an authorized station
Station Agents	station agent was added when the IP Telephony Server was initially
	configured. Up to four authorized station agents can be configured.
	To add authorized station agents:

1From the explorer tree in EMS, click on the IP Telephony Server you want to add authorized station agents to.

2From the right-hand pane, click the Authorized Stations tab.

3Click Add.

The Add row to table window appears.

4From the IP field, enter the IP address of the server you want to be allowed as an authorized station agent.

5From the NetMask field, enter the subnet mask IP address of the server.

6Click OK.

The authorized agent is added to the table.

Deleting Authorized To delete an authorized station agents:

Station Agents

1From the explorer tree in EMS, click on the IP Telephony Server you want to delete an authorized station agents from.

2From the right-hand pane, click the Authorized Stations tab.

3Click the row containing the IP address you want to delete.

4Click Delete.