Software Installati on Procedure 15
Software Installation Procedure
Use this section in either of these cases:
■If these Intelligent Switching version 8.1.2 release notes are included
in your system packaging, then version 8 .1.2 is already installed on
your system. Use this “Software Installation Procedure” se ction and
the Software CD-ROM only if you need to reinstall the software l ater.
■If you are upgrading an existing system to Intelligent Switching
software version 8.1 .2, read through this entire “Software Installation
Procedure” section at least once before you start the installation
process.
Software Files on the
Software CD-ROM
Intelligent Switching software version 8.1.2 incl udes the following
directory and file structure:
■Mib_defs
■baseMibs
■hpov
■mosy
■smic
■snm
■Software
■lp2500c
■lpexpand
■lpx2000s
Filter Builder The Software CD-ROM also includes the Filter Builder utility, which you
can use to develop and test packet filters for th e CoreBuilder 2500
system. You load Filter Builder software on a PC, not on the system. See
the LAN Switching Tools Filter Builder Getting Started Guide on the
Documentation CD-ROM for more information about installing and using
Filter Builder.
Software Files on the
3Com Web Site
You can also obtain Intelligent Switching software version 8.1.2 from the
3Com Web site. For easy downloading, all software files are compressed
into one file. To locate this file, begin from the following URL:
http://support.3com.com/software/switches.ht m