24 COREBUILDER 2500 INTELLIGENT SWITCHING SOFTWARE VERSION 8.1.2
5At the Password prompt, enter your password. The field doe s not
display the characters that you enter.
After you enter your password, the system begins to retrieve the file from
the host device.
When the installation is complete, the system returns you to the top level
of the Administration Console. You do not need to reboot the system.
Example Host IP address [192.9.200.14]: 192.9. 200.96
Install file pathname[/usr/c b2 500/lp2500c]:
User name: scottco
Password:
Programming flash memor y block 1 of 15...
Programming flash memor y block 2 of 15...
Programming flash memor y block 3 of 15...
.
.
Programming flash memor y block 15 of 15...
Installation complete.
6You must now reset the password for the administer access level.
Follow these steps:
This step activates patch number 32 in this release. See “About Software
Version 8.1.2” earlier in these release notes for patch descriptions.
aFrom the top level of the Administration Conso le, enter:
system password
You are prompted for an access level to change.
bEnter administer
cAt the prompt for your old password, enter the old pa ssword.
dYou are prompted for a new password. Enter a new password.
eAt the prompt, enter your new password again.
7Unlock the Administration Console.
aFrom the top level of the Administration Conso le, enter:
system consoleLock
bEnter off
You have completed the installation procedure for Intelligent Switching
software version 8.1.2.