52 APPENDIX B: ADMINISTERING ATM
Setting the Virtual
Path Identifier
For each ATM port, you can set the virtual path identifier (VPI) used by
UME for the Interim Local Management I nterface (ILMI). To set the VPI:
1From the top level of the Administration Conso le, enter:
atm ume vpi
You are prompted for an ATM port.
2Enter the ATM port for which you want to set the virtual path identifier.
3Enter the new value for the VPI.
The new VPI takes effect after the port has been disabled and then
enabled.
Setting the Virtual
Channel Identifier
You can set the virtual channel identifier (VCI) used by UME for the
Interim Local Management Interface (ILMI). To set the VCI:
1From the top level of the Administration Conso le, enter:
atm ume vci
You are prompted for an ATM port.
2Enter the ATM port for which you want to set the virtual channel
identifier.
3Enter the new value for the VCI.
The new VCI takes effect after the port has been disabled and then
enabled.