set usergroup expire-password-in 277
set usergroup
expire-password-in
Specifies how long the passwords for the users in user group are valid
before they must be reset.
Syntax set usergroup group-name expire-password-in time
group-name — Name of a group for password users.
time — How long the passwords for the users in the specified
group are valid. The amount of time can be specified in days (for
example, 30 or 30d), hours (720h), or a combination of days and
hours (30d12h).
Defaults — By default, user passwords do not expire.
Access — Enabled.
History — Introduced in MSS 6.0.
Usage — Use this command to specify how long the passwords for
the users in a group are valid. After this amount of time, the passwords
expire, and must be reset.
Examples — The following command sets the passwords for the
users in user group cardiology to be valid for 30 days:
WX# set usergroup cardiology expire-password-in 30
success: change accepted.
See Also
clear user lockout on page 226
set authentication minimum-password-length on page 251
set authentication password-restrict on page 252
set user on page 271