set ap auto radiotype 365

set ap auto

radiotype

Sets the radio type for single-MAP radios that use the MAP configuration
profile.
Syntax — set ap auto [radiotype {11a | 11b| 11g}]
radiotype {11a | 11b| 11g} — Radio type. (The 11a option
applies only to single-radio models. The 802.11a radio in two-radio
models is always 802.11a.):
11a — 802.11a
11b — 802.11b
11g — 802.11g
Defaults — The default radio type for models AP2750, MP-241, and
MP-341, and for the 802.11b/g radios in other models is 802.11g in
regulatory domains that support 802.11g, or 802.11b in regulatory
domains that do not support 802.11g.
Access — Enabled.
History — Version 6.0 removed the dap option.
Examples — The following command sets the radio type to 802.11b:
WX4400# set dap auto radiotype 11b
success: change accepted.
See Also
set ap auto on page 362
set ap auto mode on page 366
set ap auto persistent on page 364