clear spantree statistics 487
History —Introduced in MSS Version 3.0.
Usage — MSS does not change a port’s priority for VLANs other than the
one(s) you specify.
Examples — The following command resets the STP priority for port 2 in
VLAN avocado:
WX4400# clear spantree portvlanpri 2 vlan avocado
success: change accepted.
See Also
clear spantree portpri on page 485
display spantree on page 488
set spantree portpri on page 507
set spantree portvlanpri on page 509
clear spantree
statistics
Clears STP statistics counters for a network port or ports and resets them
to 0.
Syntax — clear spantree statistics port-list [vlan vlan-id]
port-list — List of ports. Statistics counters are reset on the
specified ports.
vlan vlan-id — VLAN name or number. MSS resets statistics
counters for only the specified VLAN.
Defaults — None.
Access — Enabled.
History —Introduced in MSS Version 3.0.
Examples — The following command clears STP statistics counters for
ports 1, 3, and 5 through 8, for all VLANs:
WX1200# clear spantree statistics 1,3,5-8
success: change accepted.
See Also
display spantree statistics on page 494