set radio-profile auto-tune channel-lockdown 405
Examples — The following command sets the channel interval for radios
in radio profile rp2 to 2700 seconds (45 minutes):
WX4400# set radio-profile rp2 auto-tune channel- interval 2700
success: change accepted.
See Also
display radio-profile on page 350
set radio-profile auto-tune channel-config on page 402
set radio-profile auto-tune channel-holddown on page 403

set radio-profile

auto-tune

channel-lockdown

Locks down the current channel settings on all radios in a radio profile.
The channel settings that are in effect when the command is entered

are changed into statically configured channel assignments on the

radios. RF Auto-Tuning of channels is then disabled in the radio profile.
Syntax — set radio-profile name auto-tune channel- lockdown
name — Radio profile name.
Defaults — By default, when RF Auto-Tuning of channels is enabled,
channels continue to be changed dynamically based on network
conditions.
Access — Enabled.
History —Introduced in MSS Version 5.0.
Usage — To save this command and the static channel configuration
commands created when you enter this command, save the
configuration.