700 CHAPTER 22: SNOOP COMMANDS
clear snoop Deletes a snoop filter.
Syntax — clear snoop filter-name
filter-name — Name of the snoop filter.
Defaults — None.
Access — Enabled.
History —Introduced in MSS Version 4.0.
Examples — The following command deletes snoop filter snoop1:
WX1200# clear snoop snoop1
See Also
set snoop on page 701
display snoop info on page 706
clear snoop map Removes a snoop filter from a MAP radio.
Syntax — clear snoop map filter-name ap ap-num radio {1 | 2}
filter-name — Name of the snoop filter.
ap ap-num — Number of a MAP to which the snoop filter is mapped.
radio 1 — Radio 1 of the MAP.
radio 2 — Radio 2 of the MAP. (This option does not apply to
single-radio models.)
Defaults — None.
Access — Enabled.
History —Introduced in MSS Version 4.0.