clear history 43
clear history Deletes the command history buffer for the current CLI session.
Syntax — clear history
Defaults — None.
Access — All.
History — Introduced in MSS Version 3.0.
Examples — To clear the history buffer, type the following command:
WX4400# clear history
success: command buffer was flushed.
See Also
history on page 51
clear prompt Resets the system prompt to its previously configured value. If the prompt
was not configured previously, this command resets the prompt to its
default.
Syntax — clear prompt
Defaults — None.
Access — Enabled.
History — Introduced in MSS Version 3.0.
Examples — To reset the prompt, type the following command:
wildebeest# clear prompt
success: change accepted.
WX4400#
See Also
set prompt on page 59. (For information about default prompts, see
“Command Prompts” on page 28.)