| MODEL 2100 OVERHEAD PROJECTOR |
COLOR TUNING CABLE | COLOR TUNING CABLE |
(Before Serial Number 422868) | (After Serial Number 422868) |
NOTE | No adjustment. |
Tension in cable should be 3/16" |
|
maximum. |
|
A.Raise the Top Cover Assembly by pulling the Release Latch and lift up. (See Figure)
B.Turn the Color Tuning Knob clockwise to the maximum.
C.While holding the Cable Screw, loosen the Cable Nut. Using pliers, pull the slack out of the cable.
D.Retighten Cable Nut and Screw. (See Figure)
