3M 247 Maintenance and Storage, to clean the exterior of the warming unit:, to clean the heating plates:, 1.To avoid device damage:, 3.Wipe with a dry, soft cloth

Check the 3MTM RangerTM system website to ensure you have the most recent version of this document. www.rangerfluidwarming.com reorder #202456B

English 3MTM RangerTM Irrigation Fluid Warming System

Maintenance and Storage

Cleaning the Ranger Irrigation Fluid Warming Unit

Clean the Ranger irrigation fluid warming unit on an as-needed basis.

CAUTION

1.To reduce the risks associated with cross-contamination:

•The cleaning tool provides only superficial cleaning, it does not disinfect or sterilize the interior of the unit.

NOTICE

1.To avoid device damage:

•Do not immerse the warming unit in cleaning or sterilizing solutions. The unit is not liquid proof.

•Do not clean the warming unit with solvents. Damage to the case, label, and internal components may result.

•Do not insert metallic instruments in the warming unit.

•Do not use abrasive materials or solutions to clean the heater plates.

•Do not allow spills to dry inside the unit, as this may make it more difficult to clean the unit.

to clean the exterior of the warming unit:

1.Disconnect the Ranger irrigation fluid warming unit from the power source.

2.Wipe the outside of the unit with warm, soapy water, nonabrasive cleaning solutions, dilute bleach, or cold sterilants. Do not use abrasive materials.

3.Wipe with a dry, soft cloth.

to clean the heating plates:

The Ranger hardware cleaning tool, is intended to clean both heating plates of the warming unit. It is not necessary to disassemble the warming unit to use the tool.

12