
Check the 3MTM RangerTM system website to ensure you have the most recent version of this document. | www.rangerfluidwarming.com reorder #202456B |
3MTM RangerTM Irrigation Fluid Warming System | English |
|
|
method
1.Unplug the irrigation fluid warming unit.
2.Unfold the cleaning tool. Wet the foam pads with a nonabrasive solution, such as AlconoxTM brand detergent.
3. Insert the tool from the back of the unit and pull the tool all the way out from the front.
4.Rinse the tool with water and repeat 3 times. Discard the tool according to institutional protocol.
5.Wipe off the unit to remove excess fluid.
to clean resistant, dried-on fluids:
1.Spray a nonabrasive solution inside the slot of the warming unit and let sit for
2.Clean the unit by using the cleaning tool.
NOTE: You may use a nonmetal instrument, such as a cotton swab, to clean the upper channels. If you are unable to adequately clean the unit, call 3M Patient Warming technical service.
Storage
Store all components in a cool, dry place when not in use.
Servicing
There are no
Call 3M Patient Warming technical service at
Alconox is a trademark of Alconox, Inc.
202456B English | 13 |
|