Using the Configuration Page
Certain set‑up and configuration options are available on the password‑protected 3M™ Attest™ Auto‑reader 390G Web App Configuration page. Ideally, the 3M™ Attest™ Auto‑reader 390G should be empty (i.e., have no incubating BIs) when it is reconfigured. Navigate to the Configuration page by entering either:
1)http://attestxxxxxx/protect/config.htm (where xxxxxx is the 6‑digit unit serial number), or
2)http://xxx.xx.xxx.xx/protect/config.htm (where xxx.xx.xxx.xx is the IP address)
in the web browser address bar and pressing Go or Enter. A security screen will appear. Fill in the fields as follows:
User name: manager
Password: Attest
and press OK.
Click on the desired radio buttons to change settings.
Language | Selected setting indicates language in which text on 3M™ Attest™ Auto‑reader 390G Web App pages will appear on the PC/mobile device | ||
screen. |
| ||
|
| ||
|
|
| |
| Selecting Enable | allows the user to configure the 3M™ Attest™ Auto‑reader 390G from the buttons on the unit itself. | |
Pushbutton Configuration | Selecting Disable | prevents the user from being able to configure the 3M™ Attest™ Auto‑reader 390G from the buttons on the unit | |
| |||
| itself. |
| |
|
|
| |
Buzzer Configuration | Selecting Enable | enables the audible alarm. The speaker icon will appear on the 3M™ Attest™ Auto‑reader 390G LCD panel. | |
Selecting Disable | disables the audible alarm. The speaker icon will disappear from the 3M™ Attest™ Auto‑reader 390G LCD panel. | ||
| |||
|
| ||
Attest Auto‑reader 390G Nickname | Naming the 3M™ Attest™ Auto‑reader 390G may be useful in facilities with multiple units. The assigned nickname will appear on the | ||
3M™ Attest™ Auto‑reader 390G Web App Status page. | |||
| |||
|
| ||
Enable DHCP | Default: Setting is checked indicating the Web App will use the Dynamic IP address automatically assigned when the 3M™ Attest™ | ||
Auto‑reader 390G is connected to the network. Remove the check if you wish to use a Static IP address assigned by your facility IT. | |||
| |||
|
| ||
IP Address | Enter Static IP address assigned by IT. | ||
|
|
| |
Gateway | Enter Gateway. |
| |
|
|
| |
Subnet Mask | Enter Subnet Mask. |
| |
|
|
| |
Primary DNS | Enter Primary DNS. |
| |
|
| ||
Use Computer Time | Check this box if you wish to set the clock on‑board the 3M™ Attest™ Auto‑reader 390G using the computer’s clock. | ||
|
| ||
Attest Auto‑reader 390G Time | Alternatively, leave the Use Computer Time box unchecked and complete the date and time boxes to set the | ||
3M™ Attest™ Auto‑reader 390G clock. | |||
| |||
|
|
| |
After changing desired settings, click on Save Config button to save your changes. A new screen confirming the settings were successfully changed appears.
1
11
