8.Synchronize the phase position of the pixel frequency and scanning frequency. Choose the menu item Sync. Image interference’s and flickers can be observed with some settings as shown in the following figure:
9.In a range of several settings an image is projected that is free of interference. If the
10.An automatic setting of the synchronization can be called up by using the ENTER key.
11.Minor interference, where one color meets another, can be corrected by manually adjusting the Brightness and Contrast. Normally, the contrast should be set to approximately the medium value. Lower values cause an increase in background intensity.
12.Center the projected image using the H. off and V. off settings.
13.To leave the Setup menu, press the MENU key.
14.If parameter settings have been changed, a warning is displayed. Confirm the changed settings by using the ENTER key.
24 | 3M™ Multimedia Projector MP8610 | © 3M 1998 |
