3M MP8760 manual Advanced Setup Description / Action Default

4-5. Menu Adjustments/Settings, continued

In active PC/RGB mode:

Advanced Setup	Description / Action	Default
(PC/RGB)		Setting
Submenu Items
Projection	Select projection orientation	standard
(drop down window)	(standard / Rear / Rear/Ceiling /
	Ceiling)
Color Manager	Display Color Manager submenu
Remote Control	Remote control receiver -on / -off	-on
RC Address	Select remote control address	1
	(1 / 2 / 3 / 4)
Sync Mode1	Select Sync Mode for PC/RGB1	separate TTL
(drop down window)	(separate TTL / composite TTL /
	separate ana. / composite ana. /
	sync on green)
Sync Mode2	Select Sync Mode for PC/RGB2	separate TTL
(drop down window)	(separate TTL / composite TTL /
	separate ana. / composite ana. /
	sync on green)
SOG Level	Adjust level for sync on green
	synchronization
Reset Data Modes	Set all data modes to factory default
	settings.
Reset lamp display	Resets the lamp hours displayed on
	the Info window
Test	Display test submenu

Advanced Setup

Projection	standard
Color Manager
Remote Control
RC Address	1
Sync Mode1	separate TTL
Sync Mode2	separate TTL

SOG level

Reset Data Modes

Reset lamp display

Test

ENGLISH

In active Video mode:

Advanced Setup	Description / Action	Default
(Video)		Setting
Submenu Items
Projection	Select projection orientation	standard
(drop down window)	(standard / Rear / Rear/Ceiling /
	Ceiling)
Color Manager	Display Color Manager submenu
Remote Control	Remote control receiver -on / -off	-on
RC Address	Select remote control address	1
	(1 / 2 / 3 / 4)
Video standard	Select Video standard	automatic
(drop down window)	(PAL B,G,H,I / NTSC M / SECAM /
	NTSC 44 / PAL M / PAL N / PAL 60 /
	NTSC COMB / automatic)
Reset lamp display	Resets the lamp hours displayed on
	the info window
Test	Display test submenu

Advanced Setup

Projectionstandard

Color Manager

Remote Control
RC Address	1
Video standard	automatic
Reset lamp display
Test

 3M IPC 2000 3M Multimedia Projector MP8760 11