3M MP8760 manual Maintenance, Replacing The Air Filter, Replace or clean as needed, English

Section 6: Maintenance

6-1. Replacing The Air Filter

For best performance, replace the air filter each time the projection lamp is changed.

! Note

Periodically check air filter for excess dust or dirt.

Replace or clean as needed.

1.Unplug the power cord (1) of the projector.

2.Unscrew two screws (2) securing back panel.

3.Remove the back panel (3).

4.Separate the air filter from the back panel (4).

5.Vacuum (5) the air filter to remove the dust and dirt.

6.Insert the air filter in the back panel.

7.Insert the back panel and secure with screws (2).

4

2 2

3

I O

SVHS / AUDIO IN VIDEO 1 / AUDIO IN VIDEO 2 / AUDIO IN	MONITOR	PC / RGB 2	AUDIO IN AUDIO OUT
	RS232	PC / RGB 1

5 6

1

ENGLISH

EPS-53A

Figure 6-1. Removing Air Filter Door

 3M IPC 2000 3M Multimedia Projector MP8760 17