ADJUSTING THE CLOCK

The UA-1020 blood pressure monitor has a built-in clock that gives you the time and date and can tell you when a blood pressure reading stored in memory was taken. We recommend that you adjust the clock prior to use. To adjust the clock, follow these simple steps:

1. Press the clock button located to the right of the display.

2. Use the arrow

buttons to set the year.

3.After reaching the desired year, press the clock button again.

4.Repeat the process for the month, day and hour.

5.The next setting will be for pressure.

ADJUSTING THE PRESSURE

1.After setting the year, month, day and hour, the next mode is the pressure setting.

2.Default is , which stands for automatic.

3.For even more rapid readings, you can adjust the default to about 30 mmHg or more above your expected systolic pressure.

4.Use the arrow buttons to set the pressure.

5.After reaching the desired pressure, press the clock button again.

6.The next setting will be for TriCheckMode.

In Canada - Auto Control Medical (Toll-Free): 1-800-461-0991

E-10

Page 11
Image 11
A&D UA-1020CN instruction manual Adjusting the Clock, Adjusting the Pressure