A&D UA-1020CN instruction manual About Memory, Press the , or Start button to turn the device off

ABOUT MEMORY

Note: This device stores the last 90 measurements in memory. The device announces the memory

data values as they are displayed. Press or

1.Press the or button. The average of all measurements and the number of data are displayed. (If no data, “0” is displayed.

Press the , or START button to turn the device off.)

2.Each time the button (or the button to display the data in the reverse order) is pressed, the memory data is displayed as follows.

Average of all AM (morning) measurements taken between 4:00 and 9:59. (In the example, 10 measurements. If no data, “--” is displayed.)

Average of all PM (evening) measurements taken between 18:00 and 1:59. (In the example, 9 measurements. If no data, “--” is displayed.)

Most recent data (See No. 35). Three seconds after the data number display, the measurement data is displayed.

Last data (No.1). Three seconds after the data number display, the measurement data is displayed.

Average systolic

Average diastolic

Average pulse

Average of all the data

Average systolic

Average diastolic

Average pulse

Average of AM data

Average systolic

Average diastolic

Average pulse

Average of PM data

Systolic

Diastolic

Pulse

Most recent data

Systolic

Diastolic

Pulse

Last data (Oldest)

3.After the last data is displayed, press the

button to return the average display of all measurements.

4. Press the START button to turn the device off. After one minute of non-operation, the device will turn off automatically.

In Canada - Auto Control Medical (Toll-Free): 1-800-461-0991 E-18