A&D UA-1020CN instruction manual Measurement Using Tricheck, Press the Start button

MEASUREMENT USING TRICHECK

1.Press the START button.

All of the display segments are displayed. Zero (0) is displayed blinking briefly and the first measurement starts.

2.When the measurement is complete, the systolic and diastolic pressure readings and pulse rate are displayed, then a one-minute countdown starts for the second measurement.

3.After one minute, the second measurement starts.

4.When the measurement is complete, the average readings of the first and second measurements are displayed, then a one-minute countdown starts for the third measurement.

5.After one minute, the third measurement starts.

6.When the measurement is complete, the average readings of the three measurements are displayed and stored in memory.

Notes:

During the measurement, the TriCheck symbol is displayed.

To cancel the measurement, press the START button. In this case, no data is stored in memory.

At heart level

START Press

All of the display segments displayed

First measurement

	Results of the
One minute after	first measurement
Second measurement
	Average of the first and
One minute after	second measurements
Third measurement
	Average of the
	three measurements

When the cuff fit error symbol appears during the first measurement, cancel the measurement, reapply the cuff correctly and start a new measurement.

After measurement, the average data of the three measurements is stored in memory. No data will be stored, when canceling the measurements, or before completion of the third measurement.

In Canada - Auto Control Medical (Toll-Free): 1-800-461-0991 E-14