Model 392 User Guide
10
Making and Answering Calls
Adjusting the Volume
Pressing the volume bar adjusts the
receiver, speaker, and ringer
volume.
• To adjust the ringer volume on a
line, leave the handset in the cra-
dle and press the volume
— bar while there is no
active call. The display shows the
ringer volume status for each
line. Press the Line1 or Line2 soft-
key to select the line. Then press
the volume — bar to
adjust the ringer volume. There
are 8 settings for the ringer - the
display will temporarily indicate
the current ringer volume setting.
• To adjust the handset volume, lift
the handset and press the volume
— bar while you are on a
call. The handset will return to
the default volume after you
hang up.
• To adjust the speaker volume,
press the volume
—
bar
while the speaker is activated
(activate the speaker by pressing
g). The speaker will
remain at this volume until it is
adjusted again.
E 392.book Page 10 Friday, January 18, 2002 4:12 PM