Model 392 User Guide
6
Installation
here. Push the phone onto the pegs,
then slide it down until it is secure
(D). Plug the power adaptor into a
power outlet (E).
Note: You may wish to purchase a
short phone cord from a local
supplier for a wall installa-
tion.
7. Insert number card
Write your telephone number on
the number card, and place it into
the card slot on the telephone,
located under the mouthpiece in the
handset cradle. Gently bend the
clear plastic lens into the slot, over
the number card.
8. Insert Faceplate
Snap the faceplate into the recess
provided above the dial pad. Slide
the tab on the left-hand side of the
faceplate into the slot. Then press on
the right-hand side of the faceplate
to snap it into place.
9. Customize the telephone
Follow the instructions in the
section “Customizing your phone”
to customize your Model 392
telephone.
10. Using Services
Follow the instructions in the
section “Using Services” to
program your Model 392 telephone
for enhanced telephone provider
subscription services and feature.
E 392.book Page 6 Friday, January 18, 2002 4:12 PM