5
Model 392 User Guide
Installation
I) Installing the phone when both
phone lines originate from a single
jack:
• Connect the phone cord to the
jack
• Plug the power adapter into a
power outlet
II)Installing the phone when two
phone lines originate from two
separate jacks:
• As shown in the diagram below,
use the two line adaptor for
installation.
• Connect the line cords as shown
from the wall jacks to the two line
adaptor.
• Plug the power adapter into a
power outlet.
6. Install on a wallFor effective wall installation, both
telephone lines should originate
from a single jack. Contact your
local Service Provider if your
telephone lines originate from two
separate jacks.
To install the Model 392 on a wall:
Connect the cord to the wall jack
(A). Coil the phone cord into the
space provided on the back of the
phone (B). Then align the telephone
so the hooks on the wall plate (C)
align with the wall-mount slots on
the back of the phone, as shown
A
B
C
D
E
43
4
5
3
4
5
Power Adaptor
Phone cord
Stand Line grooves
Line 1 & Line 2
Adaptor
Line 1 Line 2
Adaptor
Line 1 Line 2
Line 2Line 1
Plug into phone
E 392.book Page 5 Friday, January 18, 2002 4:12 PM