98 Model 6730i IP Phone User Guide
Line Keys and Programmable Keys
Paging Key (Sends the RTP Stream)
You can configure a Paging key on the phone that allows you to send a Real Time Transport
Protocol (RTP) stream to pre-configured multicast address(es) without involving SIP signaling.
You enter a multicast IP address(es) and a port number for the Paging key, that when pressed,
initiates an outgoing multicast RTP session. This is called Group Paging on the IP phones.
You can also specify group paging RTP addresses that the phone listens for when receiving RTP
streams. You can specify up to 5 listening multicast addresses at the path, Basic
Settings->Preferences->Group Paging RTP Settings.
For more information about Group Paging and how it works, and to specify multicast addresses,
see “Group RTP Paging (receives RTP streams)” on page174.
Configuring a Paging Key
1. Click on Operation->Programmable Keys..
2. Select from "Key 1" through "Key 8". (Keys 5 and 6 can be made configurable only by
your system administrator.)
3. In the "Type" field, select Paging.
4. In the “Valu e” field, enter a multicast IP address and a port number for the Paging key.
When you press this key, the phone initiates an outgoing multicast RTP session to the
specified address using the specified port. (For example, 239.0.1.15:10000).
Aastra Web UI
Note: Keys 5 and 6 (SAVE and DELETE keys) can be made configurable ONLY
by your System Administrator.
Note: The “Value” field allows for one multicast address entry only.