Lexicon, Inc. |
|
|
Printed on: 10/19/00 | ||
LED Acknowledge Enable: | TRUE Indicates the | |
indicate the
FALSE Indicates the
overload LED’s.
7.3.32 Set Communication Configuration
The Set Communication Configuration Command allows the serial port user to setup the various serial port/ protocol configuration parameters.
7.3.32.1 Command Packet Description |
|
| |
Application Header: |
|
|
|
Command | DC_CMD_SET_COM_CONFIG |
| 0x30 |
Data Count |
| 1 | 0x01 |
Application Data: |
|
|
|
Data[0] | Configuration Register 0 |
| nn |
7.3.32.2 | Data Description | |
Data Word | Bit | Definition |
0 | 0 | Acknowledge Enable |
0 | 1 | Parameter Change Enable |
0 | 2 | LED Acknowledge Enable |
Acknowledge Enable: | TRUE | Indicates the |
the Host. | FALSE | Indicates the |
| ||
Notification messages. The | ||
Parameter Change Enable: TRUE | Indicates the | |
Notification as specified in the Parameter Change Notification Message. | ||
Notifications. | FALSE | Indicates the |
|
| |
LED Acknowledge Enable: | TRUE Indicates the | |
indicate the
FALSE Indicates the
overload LED’s.
7.3.32.3 DC-2/MC-1 Response
The data values transmitted will be copied over to the registers stored in nonvolatile RAM. The
7.3.33 Set Mute
The Set Mute Command message allows the RS232 users to set/clear the
7.3.33.1 Command Packet Description
32 of 44
