-Beep Temp.
This item selects the warning temperature limit.
※The shutdown temperature must be set above the warning temperature.
Voltage Monitoring
Click <Enter> key to enter its submenu:
µGuru Utility v1.00C
ABIT EQ
Voltage Monitoring
| Reading | Shutdown | Beep | High |
| Low |
|
|
| Enable | Enable | Limit |
| Limit |
|
(*)CPU Core Voltage | 1.27 | V (*) | (*) | 1.55 | V | 0.00 | V |
(*)DDR Voltage | 1.80 | V ( ) | (*) | 2.15 | V | 1.45 | V |
(*)DDR VTT Voltage | 0.89 | V ( ) | (*) | 1.05 | V | 0.70 | V |
(*)CPU VTT 1.2V Voltage | 1.20 | V ( ) | (*) | 1.45 | V | 0.95 | V |
(*)MCH & PCIe 1.5V Voltage | 1.50 | V ( ) | (*) | 1.80 | V | 1.20 | V |
(*)MCH 2.5V Voltage | 2.50 | V ( ) | (*) | 3.00 | V | 2.00 | V |
(*)ICH 1.05V Voltage | 1.05 | V ( ) | (*) | 1.25 | V | 0.85 | V |
(*)ATX +12V | 12.00 | V ( ) | (*) | 14.40 | V | 9.60 | V |
(*)ATX +12V | 12.00 | V ( ) | (*) | 14.40 | V | 9.60 | V |
(*)ATX +5V | 5.00 | V ( ) | (*) | 6.00 | V | 4.00 | V |
(*)ATX +3.3V | 3.30 | V ( ) | (*) | 3.95 | V | 2.65 | V |
(*)ATX 5VSB | 5.00 | V ( ) | (*) | 6.00 | V | 4.00 | V |
|
|
| |||||
:Move Enter:Select | F10:Save ESC:Exit |
| |||||
All Voltages
These items display the voltage of each element.
-Shutdown Enable
Use <Space> key to enable system shutdown function. If the voltage of corresponding element is higher/lower than the high/low limit, the system will automatically shutdown.
-Beep Enable
Use <Space> key to enable warning beeps function. If the voltage of corresponding element is higher/lower than the high/low limit, warning beeps will sound.
-High/Low Limit
These items set the high and low voltage limit.
※The value of high limit must be set above the one of low limit.
|
