LED Effect Control (For model
This item selects the displaying mode for all the LEDs located at the bottom side of the motherboard.
[All OFF]: All the LED lights off.
[All ON]: All the LED lights on without any flashing effect.
[MODE 1 ~ MODE 6]: All the LED lights on with the flashing effect by one of these modes.
Temperature Monitoring |
|
|
| |
Click <Enter> key to enter its submenu: |
|
|
| |
|
|
|
|
|
| µGuru Utility v1.00C |
|
|
|
ABIT EQ |
|
|
|
|
Temperature Monitoring |
|
|
| |
| Reading Shutdown | Shutdown | Beep | Beep |
| Enable | Temp. | Enable | Temp. |
(*)CPU Temperature | 59°C/138°F (*) | 85°/185°F | (*) | 75°C/167°F |
(*)System Temperature | 42°C/107°F ( ) | 65°°C/149°F (*) | 55°C/131°F | |
(*)PWM1 Temperature | 60°C/140°F ( ) | 90°°C/194°F (*) | 80°C/176°F | |
(*)PWM2 Temperature | 60°C/140°F ( ) | 90°°C/194°F (*) | 80°C/176°F | |
(*)PWM3 Temperature | 60°C/140°F ( ) | 90°°C/194°F (*) | 80°C/176°F | |
(*)PWM4 Temperature | 60°C/140°F ( ) | 90°°C/194°F | (*) | 80°C/176°F |
:Move Enter:Select | F10:Save ESC:Exit |
BIOS Setup
CPU Temperature/System Temperature/PWM1~4 Temperature
These items display the temperature of CPU, System, and Power Module.
-Shutdown Enable
Use <Space> key to enable system shutdown function. If the CPU/System/PWM’s temperature exceeds the shutdown temperature limit, the system will shutdown automatically.
-Shutdown Temp.
This items sets the temperature that will shutdown the system automatically in order to prevent system overheating.
-Beep Enable
Use <Space> key to enable warning beeps function. Once the system has detected that the CPU/System/PWM’s temperature exceeded the beep temperature limit, warning beeps will sound.
|
