-External Clock

This item selects the external clock frequency. Due to the specification limit of the CPU you installed, the speed you set over its standard bus speed is supported, but not guaranteed.

-Multiplier Factor

This item displays the multiplier factor for the CPU you installed.

-Estimated New CPU Clock

This item displays an estimated CPU processor speed.

-N/B Strap CPU As

This item sets the external hardware reset strap assigned to MCH (Memory Controller Hub).

-DRAM Spec. (CPU:DRAM)

This item determines the DRAM frequency.

-Estimated New DRAM Clock

This item displays an estimated DRAM speed.

Voltages Control

This option allows you to switch between the default and user-defined voltages. Leave this setting at default unless the current voltage setting cannot be detected or is not correct. The option “User Define” enables you to select the following voltages manually.

-CPU Core Voltage

-DDR SDRAM Voltage

-MCH & PCIE 1.5V Voltage

BIOS Setup

AW9D-MAX, AW9D

3-3

Page 39
Image 39
Abit AW9D-MAX manual Bios Setup