Chapter 3 | |
|
|
"USB Keyboard Support:
Two options are available: OS ) BIOS. The default setting is OS. If your operating system supports a USB keyboard, please set it to OS. Only in some situations, such as in a pure DOS environment that does not support a USB keyboard, should you set it in BIOS.
IDE HDD Block Mode:
Two options are available: Disabled or Enabled. The default setting is Enabled. Block mode is also called block transfer, multiple commands, or multiple sector read/write. If your IDE hard drive supports block mode (most new drives do), select Enabled for automatic detection of the optimal number of block read/writes per sector the drive can support.
Onboard Sound Controller:
Two options are available: Disabled or Enabled. The default setting is Enabled. This item will allows you to enable or disable the onboard sound controller.
Init Display First:
Two options are available: PCI Slot or AGP. The default setting is PCI Slot. When you install more than one display card, you can choose either a PCI display card (PCI Slot) or an AGP display card (AGP) to display the
AGP Auto Calibration:
Two options are available: Enabled or Disabled. The default setting is Enabled. This item allows the BIOS to automatically calibrate the AGP’s performance. We suggestion you set this item to Enabled.
IDE Access Interface:
Three options are available: Auto ) Embedded Bus ) PCI Bus. The default setting is Auto. This item can let you choose which access interface you want IDE devices to use.
USB1 Access Interface:
Two options are available: PCI Bus ) Embedded Bus. The default setting is Embedded Bus. This item can let you choose which access interface you want USB1 devices to use.
USB0 Access Interface:
Two options are available: PCI Bus ) Embedded Bus. The default setting is Embedded Bus. This item can let you choose which access interface you want USB0 devices to use.