Introduction of SD7-533 Features

1-3

 

 

7. Miscellaneous

!ATX form factor

!One AGP slot, five PCI slots

!Built-in IrDA TX/RX header

!Two built-in SM-Bus header

!Hardware monitoring：Included fan speed, voltages, processor and system environment temperature

!Board size: 305 * 230mm

#The Switching Power Supply must meet ATX 2.03 specification with ATX12V1 Power connector.

#Supports Wake On LAN, Modem, but your ATX power supply 5V standby power must be able to provide at least a 720mA current capacity. Otherwise, the functions may not work normally.

#This motherboard supports the standard bus speeds of 66MHz/100MHz/133MHz that are used by specific PCI, processor and chipset specifications. Exceeding these standard bus speeds is not guaranteed due to the specific component specifications.

#Specifications and information contained in this manual are subject to change without notice. Note

All brand names and trademarks are the property of their respective owners.

1-3. Item Checklist

Check that your package is complete. If you discover any damaged or missing items, please contact your retailer or dealer.

∃One ABIT SD7-533 Motherboard

∃One 80-wire/40-pin ribbon cable for master and slave Ultra DMA 100, Ultra DMA 66 or Ultra DMA 33 IDE devices

∃One ribbon cable for 3.5” floppy disk devices

∃One compact disc for support drivers and utilities

%One CA-20 back panel plate with cables (Optional)

∃One user’s manual for the motherboard

User’s Manual