SiS Chipset Drivers Installation for Windows® 98 SE & Windows® 2000

A-1

 

 

Appendix A. SiS Chipset Drivers Installation for Windows® 98 SE & Windows® 2000

After you’ve installed Windows® 98 SE or Windows® 2000, you will need to install the SiS chipset drivers. Step by step instructions on how to do this are found in the following section.

Note

After installing Windows® 98 SE & Windows® 2000, the quality of your display will be poor because it will be set to 640*480 and 16 colors. For the best screen capture quality, install the VGA drivers and set the desktop to 800*600 using True Color.

Note

Under Windows® 2000 operating system you have to install the service pack 2 (SP2) or latest service pack to get the best system performance. You can download SP2 at Microsoft® WEB site.

Note

Details of the Windows® 98 SE or Windows® 2000 operating system will not be mentioned in this manual. If you have any problems with Windows® 98 SE or Windows® 2000 installation, operation, or settings, please refer to your Windows® 98 SE or Windows® 2000 user's manual or other databases provided by Microsoft® Corporation.

Insert the SD series CD into your CD-ROM drive and it should execute the program automatically. If not, you can go to the CD location and execute the execution file at the main directory of the CD. After it has been executed you will see the screen below.

Step 1: Move the cursor to “VIA 4in1 Driver” and click on it. You will go to the next screen.

(Windows® 98 SE & Windows® 2000)

Step 2: The SiS AGP driver setup InstallShield® wizard shows up, and it will go to the next screen for a while. (Windows® 98 SE)

User’s Manual