3-28

Chapter 3

 

 

KB Power ON Password:

This item let you set the password for keypad wakeup. After you set the password, any event affecting keypad will awaken a system that has powered down.

Resume by Alarm:

Two options are available: Disabled or Enabled. The default setting is Disabled. When set to Enabled, you can set the month, date and time alarm at which the RTC (real-time clock) alarm awakens the system from Suspend mode. The enable items will appear white in color and disabled items will show a blue green color.

"Month Alarm:

Thirteen options are available: NA ) 1 ) 2 ) 3 ) 4 ) 5 ) 6 ) 7 ) 8 ) 9 ) 10 ) 11 ) 12. The default setting is NA. This field is not available to enter when the “Resume by Alarm” field is Disabled.

"Date (of Month) Alarm:

You can enter the decimal number from 1to 31, which means the date of 1 to date of 31. This field is not available to enter when the “Resume by Alarm” field is set to Disabled.

"Time (hh:mm:ss) Alarm:

You can set the Time Alarm (hh:mm:ss). Any event occurring will awaken a system that has powered down. This field is not available to enter when the “Resume by Alarm” field is set to Disabled.

3-7. PnP/PCI Configurations Setup Menu

In this menu, you can change the INT# and IRQ# of the PCI bus and other hardware settings.

Figure 3-8A. PnP/PCI Configurations Screen Shot

SD7-533 Motherboard