![](/images/new-backgrounds/1204243/204243121x1.webp)
53
•During the POST, press F2 to access the BIOS Utility and verify that the infrared port is enabled.
•Make sure both devices are
The printer does not work.
Check the following:
•Make sure that the printer is connected to a power outlet and that it is turned on.
•Make sure that the printer cable is connected securely to the computer’s USB port and the corresponding port on the printer.
•During POST, press F2 to access the BIOS Utility and verify that the USB port is enabled.
I want to set up my location to use the internal modem.
To properly use your communications software (e.g. HyperTerminal), you need to set up your location:
1Click on Start, Settings, Control Panel.
2
3Click on Dialing Properties and begin setting up your location. Refer to the Windows manual.