3.Align the screw sockets and replace the two screws.

4.Secure the Modem cable in place with the adhesive tape.

Replacing the USB Board

1.Insert the USB Board into the casing, ensuring that the USB Port is accessible through the case.

3.Lock the connector and press down on the FFC cable to secure it on the casing.

2.Run the cable along the casing and insert it into the FFC connector.

4.Ensure the locating pins is correctly seated and replace the single securing screw.

Locating Pin

Chapter 3

123

Page 133
Image 133
Acer 4935G SERIES manual Replacing the USB Board