Replacing the WLAN Module

1.Insert the WLAN board into the WLAN socket.

3.Connect the two antenna cables to the module.

NOTE: The White cable goes to the upper terminal and the black cable to the lower terminal.

2.Replace the two screws to secure the module.

IMPORTANT: Ensure that the cabling is replaced as shown to avoid trapping when the covers are replaced.

Replacing the Lower Covers

1.Replace the Lower Covers and secure the captive screws.

DIMM

Cover

HDD

Cover

WLAN

Cover

142

Chapter 3

Page 152
Image 152
Acer 4935G SERIES manual Replacing the Wlan Module, Replacing the Lower Covers