DOS Flash Utility
Perform the following steps to use the DOS Flash Utility:
1.Press F2 during boot to enter the Setup Menu.
2.Select Boot Menu to modify the boot priority order, for example, if using USB HDD to Update BIOS, move USB HDD to position 1.
|
| InsydeH20 Setup Utility | Rev 3.5 | ||
Information | Main Advanced | Security Power | Boot | Exit | |
Boot priority order: |
|
| Item Specific Help | ||
|
| Use <↑> or <↓> to select | |||
|
|
|
|
| a device, then press |
1. | IDE0 : ST9160310AS |
|
| <F5> to move it down the | |
2. | IDE1 : Slimtype DVD A DS8A2S |
|
| list, or <F6> to move | |
3. | USB FFD : |
|
|
| it up the list. Press |
4. | Network Boot : Atheros Boot Agent | <Esc> to escape the menu | |||
5. | USB HDD : |
|
|
|
|
6. | USB CDROM | : |
|
|
|
|
|
|
| ||
F1 Help | ↑↓ Select Item | F5/F6 Change Values | F9 Setup Default | ||
ESC Exit | ←→ Select Menu | Enter SelectXSubMenu | F10 Save and Exit | ||
3.Execute the IFLASH.BAT batch file to update BIOS. The flash process begins as shown.
Chapter 2 | 43 |
