5 Software
82
Startup Configuration
The Startup Configuration screen contains parameters that are related to co m puter
startup.
The table below describes the parameters in this screen. Settings in boldface are
the default and suggested parameter settings.
Parameter Description
Boot Display Sets the display on boot-up.
When set to Auto, the compute r automatically determines the dis play
device. If an external display device (e.g., monit or) is connected, it
becomes the boot display; otherwise, the computer LCD is the boot
display. When set to Both, the computer o utputs to both the
computer LCD and an external display device if one is conn ected.
Options: Auto or Both
Screen
Expansion When set to enabled, the screen will autom atically adjust the display
to fit the screen when the resolution is set 640 X 480.
Options: Enabled or Disabled
Hotkey Beep When enabled, the computer gives off a beep when a hotkey (key
combination) is pressed. See “Hotkeys” on page 12 fo r details on
hotkeys.
Options: Enabled or Disabled
Fast Boot Allows you to define your system’s booting process, whether to skip
some POST routines or proceed with the normal booti ng process.
Options: Enabled or Disabled