95

Error messages

If you receive an error message, note the message and take the corrective action.

The following table lists the error messages in al phabetical order togethe r with the

recommended course of action.

Error Messages Corrective Action
CMOS Battery Bad Contact your dealer or an authorized service center.
CMOS Checksum Error Contact your dealer or an authorized service center.
Disk Boot Failure Insert a system (bootable) diskette in the floppy drive
(A:), then press Enter to reboot.
Diskette Drive Controller
Error or No Controller
Present
Contact your dealer or an authorized service center.
Diskette Drive Error Contact your dealer or an authorized service center.
Diskette Drive Type
Mismatch Press F2 (during POST) to enter the Setup Utility; then
press Esc to exit and reconfigure the computer.
Equipment Configuration
Error Press F2 (during POST) to enter the Setup Utility; then
press Esc to exit and reconfigure the computer.
Hard Disk 0 Error Contact your dealer or an authorized service center.
Hard Disk 0 Extended Type
Error Contact your dealer or an authorized service center.
I/O Parity Error Contact your dealer or an authorized service center.
Insert system diskette and
press <Enter> key to reboot Insert a system (bootable) diskette in the floppy drive
(A:), then press Enter to reboot.
Keyboard Error or No
Keyboard Connected Contact your dealer or an authorized se r vice center.
Keyboard Interface Error Contact your dealer or an authorized service center.
Memory Size Mismatch Press F2 (during POST) to enter the Setup Utility; then
press Esc to exit and reconfigure the computer.