Chapter 2 31
IDE Secondary Channel
Master Specifies the current configuration of the IDE
device connected t o the master port of th e
secondary IDE channel.
Drive type, capacity
IDE Secondary Channel
Slave Specifies the curre nt configuration of th e IDE
device connected t o the slave port of the
secondary IDE channel.
Drive type, capacity
Total Memory Specifies the total amount of on board memory.
The memory size is automatically detecte d by
BIOS during the POST. If you install additional
memory, the system automatically adjusts this
parameter to display the ne w memory size.
Memory size in MB
1st Bank Indi cates the type of DRAM installed in the DIMM
1 socket. The None settin g indicates that there is
no DRAM installed.
DIMM type, capacity in MB
2nd Bank Indicates the type of DRAM installed in the DIMM
2 socket. The None settin g indicates that there is
no DRAM installed.
DIMM type, capacity in MB
3rd Bank Indicates the t y pe of DRAM installed in th e DIMM
3 socket. The None settin g indicates that there is
no DRAM installed.
DIMM type, capacity in MB
Serial Port 1 If enable d, indicates the IRQ and Direct Memory
Address (DMA) assigned to serial port 1. DMA, IRQ
Serial Port 2 If enable d, indicates the IRQ and Direct Memory
Address (DMA) assigned to serial port 2. DMA, IRQ
Parallel Port If enabled, in dicates the IRQ and Di rect Memory
Address (DMA) assigned to the parallel port. DMA, IRQ
PS/2 Mouse Specifies the presence of a PS/2 mouse Installed or Disabled
Parameter Description Format