Chapter 2 35
NOTE: The asterisk (*) mark indicates that the parameter appears only when you are in the Advanced Level.
The following table describes the parameters found in this men u.
Parameter Description Options
Device Detection Mode Lets you specify the type of hard di sk inst a ll ed in yo ur
system. If you want BIOS t o automatically configure
your hard disk, select Auto. If you know your hard
disk type, you can enter the setting manually.
Setting this parameter als o sets the Cylinder, Head,
Sector, and Size parameter s.
Auto, None, or User. T he User
setting allows yo u to enter your
settings manually if you know
your hard disk type. The Auto
setting also sets t he Cylinder,
Head, Sector, and S ize
parameters.
Device Type Display the type of device installed. Not configura ble. The default
is Hard Disk.
IDE Secondary Channel Mast er
Device Detection Mod e .... ........... [Auto]
Device Type.... .................... None
Cylinder........ ................... [0]
Head............. .................. [0]
Sector........... .................. [0]
Size............. .. ................ [0] M.B.
IDE Secondary Channel Slave
Device Detection Mode ............... [Auto]
Device Type........................ IDE CD-ROM
*Advanced PIO Mode................... [Enabled]
*DMA Transfer Mode................... [Enabled]