Chapter 2 33
Disk Drives
Select Disk Drives from the main menu to configure the drives installed i n your system.
NOTE: The following screen shows the Disk Drives menu:
The asterisk (*) mark indicates that the parameter appears only when you are in the Advanced Level.
The following table describes the parameters found in this men u.
Parameter Description Options
Diskette Drive A / B Allows yo u to configure your floppy driv e None
360 KB, 5.25-inch
1.2 MB, 5.25-inch
720 KB, 3.5-inch
1.44 MB, 3.5-inch
2.88 MB, 3.5-inch
IDE Primary Channel Master Lets you configure the hard disk drive
connected to the master p ort of IDE channel
1.
IDE Primary Channel Slave Lets you configure th e hard disk drive
connected to the slave port of IDE channel 1.
IDE Secondary Channel M aster Lets you configure the hard disk drive
connected to the master p ort of IDE channel
2.
IDE Secondary Channel Slave Lets you conf igure the hard disk drive
connected to the slave port of IDE channel 2.
Disk Drives
Diskette Drive A .................[1.44 MB 3.5-inch]
Diskette Drive B .................[None]
! * IDE Primary Channel Master
! * IDE Primary Channel Slave
! * IDE Secondary Channel Master
! * IDE Secondary Channel Slave