74 Chapter 4
IDE Drive 0 Error
IDE Drive 1 Error
IDE Drive 2 Error
IDE Drive 3 Error
1. Enter BIOS Setup and load the default settings.
2. Check IDE drive jumper.
3. IDE hard disk drive power.
4. IDE hard disk drive cabl e/connection.
5. IDE hard disk drive.
IRQ Setting Error
Expansion ROM Allocat ion Fail
I/O Resource Conflict(s)
Memory Resource Conflict(s)
1. Load default s ettings in Setup.
2. Enter BIOS S etup and set the Reset Resource
Assignments of the PnP/PCI Options to Yes,
then reboot the system.
3. Remove all adapter cards that are NOT factory-
installed, then reboot the system
PCI Device Error 1. Load default settin gs in Setup.
2. Enter BIOS S etup and set the Reset Resource
Assignments of the PnP/PCI Options to Yes,
then reboot the sy stem.
3. Remove all adapter cards that are NOT factory-
installed, then reboot the system.
PS/2 Pointing Device Interface Error
PS/2 Pointing Device Error
1. Re-connect PS/2 keyboard and mouse.
2. Enter BIOS Setup and load the default settings.
3. PS/2 mouse
4. PS/2 keyboard
5. System board
DMI Table Was Destroyed 1. Flash BIOS
Press Ctrl + Alt + Esc key to enter Setup or F1 key to
continue 1. Press Ctrl+Alt+Del to enter Setup and reconfigur e th e
system.
Press Esc to turn off NMI, or any key to reboot 1. Press Esc to reject NMI error or press any other key t o
reboot the system .
Insert system diskett e and press <Enter> key to
reboot 1. Insert a bootable disk into the floppy disk drive or
remove this disk if a hard disk is installed.
BIOS Messages Action/FRU