Chapter 3 63
Disassembling the Veriton 7100
Opening the Housing
This section tells you how to open the housing cover when you ne ed to install additional components inside
the system unit.
CAUTION: Before you proceed, make sure that you have turned off the system and all peripherals connected
to it.
Removing the Housi ng Cover
1. Turn off the system power and unplug all cables.
2. Place the system unit on a flat, steady surface.
3. Remove the f our screws of the right panel using a screwdr iver. Set the screws aside, you will need the
when replacing the right panel of the unit.
4. Slide the right panel out and then gently pull it outward to detach it from the housing. Do the same for the
left panel.