Major Chips Description 2-95

2.9.6 Pin Description

Table 2-18 T62.062.C Pin Description table

Item Pin Name I/O Description

SAFETY OPERATION
1DC_BAT_OUT O/P .adapter power input and battery power output terminal(
with 5 A short circuit protection)
2 DC_BAT_OUT O/P same as pin 1
3DC_BAT_OUT O/P same as pin 1
4DC_BAT_OUT O/P same as pin 1
5GND ground
6GND ground
7PERIPHERAL
SYSTEM ON
I/P system power on ,input a high pulse. user have different
way to turn on sysem by peripheral device.
85VSB_OUT O/P charger 5VSB output
9SYSTEM ON O/P connecting to main system ‘power on ’ signal
10 DISABLE I/P logic high to notice charger to turn off system
11 BT-QCHG O/P charge status, when quick charge output logic high.
12 AD5V O/P when adapter inserted, output +5V,10mA (max).
13 SMI O/P open collector, when push power on switch then output
low. (delay 6040 mS)
14 S.I.U. I/P logic high when system in use power
15 TH I/P connecting to thermistor inside battery pack using 103AT-
2 (10K/25,1%).
16 BL1# O/P when battery voltage lower than BL1 voltage then output
low (available when S.I.U).
17 ID I/P open circuit when a 9 cells LIB battery inserted,
connecting to GND when a 9 cells NiMH battery inserted.
18 BL2# O/P when battery voltage lower than BL2 voltage then output
low (available when S.I.U).
19 GND. .
20 BAT-IN-USE# O/P logic low when battery in use power
(available when S.I.U).
21 BT_VS I/P connecting to battery most positive terminal
22 GND
23 BT+ I/O connecting to battery most positive terminal
24 BT+ I/O same as pin 23
25 BT+ I/O same as pin 23
26 BT+ I/O same as pin 23